Friday, April 18, 2014

Trans-Atlantic Canoe Trip


67-year-old retired engineer, Aleksander Doba, arrived in Port Canaveral, FL, last night, Thurs., 17 April, after crossing from Portugal. He continued today through the Canaveral Barge Canal to the ICW, and will complete his trip when he arrives in New Smyrna Beach in a couple days. If you have not been following this, there has been substantial writing on his trip. These may be found on Facebook by searching for Expedition Canoeing & Kayaking.

The Edge of Nowhere

Jacket credit: goodreads.com
 
On The Edge of Nowhere, by James Huntington and Lawrence Elliott (pub. 1966 by Crown Publishers, Inc., New York, 183pp.)

Having read the book, I’d have chosen a different title---In the Heart of Nowhere. It is a true story about the author’s life in Alaska around the turn of the last century. It is about a man able to not only survive, but make a living off the land and support his family in the face of unlimited challenges and with little more than a rifle and a belt axe.

Again, I was shocked to see that our local librarian had been able to find such a book for me here in Oklahoma. It’s great that she indeed was able to find a canoeing book in a land where water barely exists, but indeed, what was at the same time so disappointing was that the last time the book was checked out was in 1971. Now that is a bloody shame. This is a book that should be required reading for every student in high school. It is not only a breathtaking book and non-stop adventure that they would enjoy, but it is about fortitude and perseverance, and making one’s way in life. While kids cry about being bored, and that they can’t survive without every trinket and gizmo, they need a little truth about making a go at life with nothing---with nothing and against seemingly impossible odds. The kids need this, but it wouldn’t hurt adults to read it as well. As written in the forward by Lowell Thomas, this autobiography “makes life and all its problems look incredibly insignificant for most of us.”

The book is packed with action that exceeds the stories of Jack London. London probably wouldn’t have added much of this in a novel because the stories would have made a novel unbelievable. In this case, the truth is indeed stranger than fiction. The author is a half-breed who had to come to terms with that label. His mother was Athabasca Indian and his father white. His mother had already made local history by traveling a thousand miles across the Arctic tundra in the depth of winter alone and on foot, and surviving. Later, at the age of seven and one of three small children, he awakes in an ice-cold cabin and comes downstairs to find his mother dead and hanging halfway out the door. His father is gone on the trapping trail. He must survive and keep his brother and infant sister alive as well. To survive as he grows, he starts trapping and hunting. He runs dog sleds, and later became one of the most noted dog sled racers in Alaska. He ended up in a hand-to-hand battle with three bears simultaneously with nothing but a belt axe, having had one bear snatch his rifle out of his hands. He is tracked by a timber wolf and suddenly realizes he is surrounded by 20 wolves just waiting for the pack leader to make his move. He knows he can’t run, but he’s armed with nothing but a single-shot .22.

Okay, you just need to read the book. It is one you will always remember. His brother, Sidney Huntington, also wrote a book about their lives. It is called “Shadows on the Koyukuk: An Alaskan Native’s Life on the River.” Some feel that James’ is the better of the two autobiographies, both are worthy of your time.








Thursday, April 17, 2014

Candlelight

There's was no attempt at matching colors.  The candles were
poured just as the wax came out of the coffee can.  My little
cat, Piper, kept an eye on quality control.
 
“Man loves company, even if it is that of a small burning candle.”
            Georg Christph Lichtenberg
“It is better to light a candle than to curse the darkness.”
“A good teacher is like a candle--it consumes itself to light the way for others.”

What is it about candles? You can’t wed without them. You can’t worship without them. You can’t be buried without them. You can’t celebrate a birthday without them. They make a romantic dinner better. Even campers love the small light of a candle lantern in the tent or at the cabin table. They offer illumination, heat, and somehow even serenity.

When we were sailing in the colder months, we always used oil lamps over electric lights. For one thing, they saved the draw on the batteries. Likewise, a few candles easily illuminated the cabin, while also driving out the chill.

When the candle burns down to the stub, rather than throwing it out, I cut out the remainder of the wick and drop the wax in a Folgers coffee can. If it is a gift candle in a glass jar, I melt the remainder left at the bottom and pour it over a sheet of aluminum foil with the edges curled up. When cooled, the wax is broken into smaller pieces and joins the candle scraps in the Folgers can. Over the years, I’ve saved a substantial amount of wax, so during the miserable weather of a winter that has refused to end, I decided it was time to put the old wax back into service by pouring a bunch of tapers. I have a plastic mold that I got decades ago from some craft store, and I picked up a couple packs of candle wicking. Once I cleared a spot on the workbench next to the canoe cradle, I set to work. You can’t go into mass production with a single mold, so the project helped to keep me occupied for weeks as the wind, sleet, snow and hail continued on outside. When the wax was gone, so was most of winter, and I have a nice collection of tapers to bring me comfort and enjoyment for months (probably years) to come.




 

Wednesday, April 16, 2014

Midway & Paddle to DC

Dave & Amy Freeman and the signature canoe.
Credit: Paddle to DC

Written in the jacket cover of North to Cree Lake was a cryptic message about what we are now seeing in fruition. It said Art Karras shared “his love for the wilderness as it was, and may never be again, unless we reshape our values and attempt to restore what we have almost lost.” Here are two must-see videos that invite us to examine our own values, to better understand our undeniable and often destructive impact on the world we live in, and to hold politicians and money interests accountable for their anything-for-a-buck, and to hell with everything else attitudes and practices. The first link goes directly to the video. In the Paddle to DC link, please read the blog concerning the issues, and then view the video that is included. There is a lot here to think about.
http://www.midwayfilm.com/

http://www.paddletodc.org/category/blog/

Paddle to DC has been added to the "Favorite Blog" section in the right margin so you can follow along while also visiting Log of Ibi.

Monday, April 14, 2014

The Trip Plan - 2

7. I incorporate a legend or key every few pages. You can adapt this to your own needs, but this is the one I use.

W-water, F-facilities, A-camping, G - groceries, S-showers, R- ramp, L-laundry
D - Diner,grill, RA - road access
Facilities, of course, are restrooms. Here is a sample of a day from one such trip plan.
---------------------------

          Chart 25
24 RA    South Island Ferry Ramp to Hagley Ramp                                     17mi

     Go E to Winyah River and turn NW. If a foul current, consider looping around S
          end of Western Channel Island and going up Winyah Bay shallows.
     W - Belle Island Marina (843)546-8491, L33.30688 Lo79.29065. (mile 4.8)
     Entrance to Sampit River and Georgetown, SC, harbor facilities. Two stealth
           spots either side of river mouth on Winyah.  Inside, Morgan Park and East
          Bay Park ramp at L33.35659 Lo79.28021, (mile 8)
               Hazzard Marine (843)527-3625, L33.36108 Lo79.27964
               The Boat Shed (843)546-4423, L33.36181 Lo79.28002.
               Harbor Walk Marina (843)546-4250, L33.36388 Lo79.28173.
     G - Groceries from above marinas, roughly a mile. Walk NE 2 blocks to
          Highmarket St., and turn L. Cross N Fraser St. (Rts. 17/521) Piggly Wiggly
          (843)527-4841, in 2nd block at Lynch St., or 1620 Highmarket St.
     R - Turn S in Sampit River toward S. Fraser St., Rt. 17 bridge, and just on S side of
          bridge is large ramp at L33.35729 Lo79.29522. (mile 9.2)
     G - From ramp parking lot to Food Lion (843)546-0972. Walk S. on S.Fraser St. to
          2234 S. Fraser. Is 1 mile from here or 2 1/4mi from Johnson’s campground.
     A-F-S-W - Johnson Marina & Campground, (843)545-8633 at L33.35534
          Lo79.32064. A bit further S on Sampit, and may be a bit pricey. (mile 10.9)
     R-W - Leaving Georgetown, Winyah becomes Waccamaw River, and continuing
          up E side of Waccamaw leads to Hagley ramp at L33.43633 Lo79.18227. (mile
          16.3 not counting any detour into Georgetown.) This would be a stop only.
          6/10mi further is a ramp & marina with limited space & no info.

25     Lay Day
-------------------

Okay, it is day 24, and you are working off of chart 25, which in this case happens to be an ICW chartbook. RA tells us that this would be a good contact or rendevous point, because there is road access at any of the stops. The day’s run will be 17 miles from point to point. You know the current is strong in Winyah River, and you notice from the chart that if the current is ebbing, you can get out of most of it by ducking around the south end of Western Channel Island and running the inside of the curve and the shallows. If you need to stop, the first stop is 4.8 miles away at a marina.

This is where Google Earth proves itself to be the paddler’s best tool for planning. You click on Tools, Ruler, and Path. Click at your departure point, and click point to point to follow the contour of your proposed track. If you wish to follow, go to L33.25077N Lo79.26930W, which you will find in the canal south of Georgetown, SC. Going E, you will exit the canal at Mile 0.9. Looking for any possible stopping places, scour the shores of both the river and island. (This is where you can add greatly to the information in an official guide. A published guide can only list sites that have been approved by the land owners and the waterway managers. There are a lot of potential stealth sites you can find on your own to supplement the guide.) We see that the shore appears to be all mud until we reach Belle Island Marina at Mile 4.8. If the wind is strong out of the north and there is a foul current, we can look at the plan and see that our next possible stop is 3.2 miles further with two possible stealth camping spots. If the conditions are bad enough, we can weigh hanging out at the marina until the current turns, or slog uphill for another 3.2 miles. This answers the third method of mileage measuring mention in paragraph 3 above. Continuing along our route, we mark and retrieve the lat-long of every facility, ramp, sandy shore or spoil island, etc., to meet our needs. In this way, it only takes a glance to see where our next possible stop would be, what we could expect to find there, and how much further we need to go to get there.

In Georgetown Harbor, you’ve maked the position, name and phone number of every facility, and location of ramps, campgrounds, and grocery stores. Since this is day 24, you know tomorrow is a planned lay day, and with all facilities and things of historical interest, you’d be hard pressed to find a better place for a day ashore. On the other hand, if you’re fully provisioned, and you’d rather avoid the expense and crowds in Georgetown, plus pick up a few extra miles, a quick glance at the plan would show (not shown in the example) that if you continued another 5 or 7 miles, you’d have your choice of either of two quiet marinas.

Two caveats are best mentioned here. For grocery stores, go on Google (or whatever browser) home page, and click on maps. In the search field, type “grocery stores near Georgetown, SC.” Markers will come up for every store that has food, but search them closely, as some will offer nothing but ice cream cones, or wine and cheese, or be a convenience store with nothing but junk food. A look at the map will easily show where the grocery is, how to get there, and using the Google path again, you can see how far away they are. You can use the same method for finding canoe/kayak outfitters, West Marine stores, or the post office.

The second caveat has to do with Google Earth. Things don’t look the same from the cockpit of your kayak or canoe as they do from a satellite 370 miles in space. What appears to be open water may be strangled with deadfall. What appears to be clear ground may indeed by impenetrable 10-12 foot-tall reeds. A nice sandy-looking landing may indeed be thigh-deep mud. Otherwise, a beautiful stealth camp spot may have been invisible to the satellite due to obscuring tree stands. Seeking and saving the position for as many favorible spots gives more options, and the chance of a nearby alternative for the occasional surprise. In spite of the occasional surprise (or disappointment), Google Earth is a fabulout tool to explore and use to your greatest benefit.

There you have it. No one style or design fits every application, but there should be a lot of ideas here to choose from, and once you explore these, you may dig deeper and come up with other ideas. You can use what you like, and ignore what you don’t. If you have other useful ideas, please share.
 
 
 

Friday, April 11, 2014

The Trip Plan

We’ve already discussed guides for rivers and watertrails. We’ve discussed maps and charts, different types, where to find them, and how to use them. Perhaps we’ve also gathered some additional information to suit our taste, like points of interest, cultural events, history, and so on. We are now ready to put it all together into a trip plan. By putting it all together, I mean that this plan tells us virtually everything we will do during the duration of our trip. Here we will determine how many days the trip will take, and thus how many supplies and provisions we will need, where and how we will resupply, what and where we can find any and all resources we will need from water, food, laundry, camping, boat ramps, and road access where others may get to us or where we can find transportation, showers and restrooms, drug stores, post offices, and the list goes on. When I started this discussion, I referred to the saying about there being more than one way to skin a cat. This is never truer than when we make decisions about putting all the aspects together into an actual operational trip plan. The nice thing about the process is that it can easily be tailored to any trip, whether backpacking, expedition paddling, or sailing. This will be long enough that I’ll break it into two posts.

1. The first thing you need to do is inspect your maps for the entire trip. You want to make sure you have indeed left no lapses in coverage. You want to double check areas of greater interest or greater difficulty to decide if you need to supplement what you have with any maps of some larger scale. It is also important to check the scales of all maps to insure there are consistent references, whether these are for mileage, lat-long, elevation, soundings, or any changes in symbols or abbreviations. If there are any inconsistencies, be sure to highlight them so that in your fatigue or confusion during the trip you don’t mistakenly begin using an inaccurate scale of reference.

2. Then take all the maps and mark them for mileage. Some maps and charts come already referenced for mileage. Mississippi River maps and charts, for example, use mileage to reference everything. Hazards, confluences, locks, ramps, even things like marinas, campgrounds, and restaurants are referred to by the mile marker they are near. In radio communications, you’ll call a tug according to what mile marker he is near and whether up or down bound on the river. Mileage is not only the easiest way to reference things, but also the fastest way to calculate a day’s run, how far we need to go to find the next rest stop, campsite, or any type of facility.

3. If the maps aren’t already marked for mileage, there are three common ways of proceeding. The simplest is to take a mile’s span and walk it off on the map, making a tick mark or dot for each mile. You can use a pair of dividers, if you have them. You can use the scale on the edge of your compass if it matches the map scale, or you can take a piece of scrap paper and mark several miles on it from the mileage scale, and transfer those miles to the map as you slide the marked paper along your route. The second method is one I don’t recommend, but it has been used by some that have become accustomed to it. Here, you take what you feel is your normal cruising boat speed, and walk the map off in intervals of time, expressed as the distance made good through the water during each hour. We will have hereby reversed the normal process. Instead of measuring by miles of travel, you are measuring by the number of expected hourly runs you can normally accomplish. This method fails in not allowing for the effects of wind or current, whether they are adverse or beneficial to your progress, or even how fatigue, nutrition, or state of mind are affecting your performance. A mile is consistent. Making bets on how fast you can paddle regardless of conditions is not. The third method is accomplished with Google Earth, which I’ll get to momentarily, but has to do with maintaining a running distance plot of every point along the path.

4. You need to decide on the depth or detail that your written plan will take, or if you need to even use one. Some paddlers feel a prepared plan takes the adventure, excitement, or the sense of discovery out of the trip. That is a decision we each need to make for ourselves, but for me a written plan brings with it much greater safety, convenience, and confidence, and there is so much that goes on during any trip that I’ve never found that it detracts from any sense of adventure or discovery. Even with a plan, I find surprises around every bend.

5. Another issue concerns your navigational style. Some use a mapping GPS, and at the other end of the spectrum is the paddler that uses a map and compass. There are benefits to both. When I do a trip plan, it is peppered with a lot of GPS positions. However, I’d strongly encourage you to learn traditional navigation or orienteering with map and compass. A mapping GPS is mindless. There are times when that’s the way to go. If it’s pouring rain, or fog is beginning to close in and visibility is approaching zero, such a navigational aid can be a true blessing. However, they tempt the paddler to become lazy, as their traditional skills become rusty, and then nonexistent. We also need to remember that a GPS is nothing more than a radio receiver. They are much more reliable than ages past, but they can still give inaccurate information due to interference, weak signals, solar flares, poor programming, or indeed when transmissions are intentionally degraded or turned off. Maps are reliable, and assuming precautions are taken to prevent induced deviation, a compass is foolproof. If your gizmo packs up while you’re in the outback, unless you carry a spare, you could be a week or a hundred miles away from getting it replaced. It only takes a couple minutes to pull the map and compass out of the pack.

6. If you want a reasonably accurate plan to permit you to anticipate the timing of everything to be encountered during the trip, allow a lay day every fifth day. The lay day could be for time lost due to being weatherbound, doing laundry and provisioning, visiting some historical or cultural point of interest, anticipating when another paddler can join or leave the trip, recovering from an injury or illness, visiting with friends, or just having a nice dinner ashore that you don‘t have to eat out of a pouch or used Country Crock tub. If trying to paddle continuously, you will get pretty sick of the routine if there isn’t an occasional break to recharge your own batteries and smell the roses. That usually comes out to about once every five days. Even though you are still working on moving the trip forward, like shopping, repairing, or managing logistics, the change of pace will work wonders for improving your attitude and enhancing your enjoyment.

Wednesday, April 9, 2014

A. L. Karras

Art Karras in 1932.
Credit: library2.usask.ca
 
In reading ‘North to Cree Lake,’ I became interested in the author, and went looking for some biographical material. There isn’t much to find. While he wrote a lot about others’ lives, he was rather reserved about his own tale. What I did find, I found even more fascinating.

The characters in the Cree Lake story were A.L. Karras and his brother Ab. Their proper names were the author, Art, and his older brother Albert. While Art was born in 1914 in Rosthern, he and his brother grew up in a farming family on the Canadian prairie, 56 miles north of the U.S. border, near the small town of Yellow Grass, Saskatchewan. When he and his brother took off for Cree Lake, 550 miles further north, neither knew anything of outdoor life beyond what they experienced on the farm, knew nothing of the wilderness experience, or trapping, and neither had ever been in a canoe before. If that wasn’t enough, Art was only 18 years of age.

North to Cree Lake was initially promoted primarily by word-of-mouth, but went on to become a classic that has gone through five printings. A. L. Karras went on to write two other books that were biographies on the lives of other Canadian trappers. The first, “Face the North Wind,” told of the lives of Fred Darbyshire and Ed Theriau. Then, his third book, titled “Northern Rover,” told the life story of Olaf Hansen, for whom Hansen Lake and a local road are named.
  
After his years as a trapper, Art went on to become a grain dealer, town administrator, and school administrator. He passed away in April, 1999, in Nipawin, Saskatchewan.



Monday, April 7, 2014

North to Cree Lake

Cover credit: goodreads.com
 
North to Cree Lake, by A. L. Karras (pub by Trident Press, New York, 1970, 255pp.) Illus. by Laszlo Kubinyi.

North to Cree Lake records true accounts of experiences in a land “where no tin cans, or bottles, or paper, or other man-made litter was to be found,” and no “influx of tourists, or developers, or promoters, or sportsmen, or despoilers” had yet arrived.

From 1932 through the winter of 1939, the author and his brother, Ab, moved into Northern Saskatchewan to live where the Depression had little effect. They built several cabins, survived minus 70-degree temperatures, and lived off the land. They decided they could get what few supplies they needed by trapping, but they knew nothing about trapping. It was hoped that they could learn from experienced trappers, but they soon found that the men who knew the trade had no intentions of sharing their knowledge. Knowledge came through many trials and a lot of errors.

We have inherited a Hollywood-induced picture of the wilderness winter, but through the author’s experiences, you get to share a lifestyle that had certainly changed little since Lewis and Clark. On the morning that the temperature dove 100-degrees below freezing, Karras described standing outside the cabin. When he exhaled, the moisture in his breath instantly froze in the air, creating a sound like a sheet of paper being slowly torn. You will find yourself being led on winter trapping trails, across frozen lakes, following caribou herds that had packed snow so hard that feet of snow could be traversed without the need of snowshoes. His accounts of wildlife encountered while walking the trap-lines gives great insight into the habits of wolves, deer, caribou, fox, bear, and others. As they build and use a dogsled team, you learn in detail what that entails. If you have read and enjoy books by Grey Fox, another wilderness writer, you’ll enjoy this book.



Friday, April 4, 2014

Celebrating Culture

A young man celebrates his pride in his heritage.
 
Jean brought my attention to the fact that Google has used a number of my photographs in Google Images. She had searched “kaw powwow images”, and when I went back to check, there were 19 of my photographs. Without pointing out which are mine, if you search “kaw powwow images”, you’ll see mine and great photographs taken by many others. Except for crowd or dancing photographs, none were taken without the person’s consent, which is always a good practice. It is also a good practice to check at the information booth or with officials near the grandstands for any concerns over photography. Some of my photographs may also be seen at:http://logofibi.blogspot.com/2011_10_01_archive.html

Since Oklahoma is so linked to Native American culture, we felt it important to take the granddaughters to experience a powwow. There were six tribes represented at the Kaw Nation powwow: Pawnee, Otoe-Missouria (originally of the Winnebago), Osage, Tonkawa, Kaw, and Ponca. They were all part of the Kaw or Kanza Nation, who gave their name to the Kansas River, also called the Kaw River, and the States of Kansas, Missouri, and Arkansas, and many other locations.

If you’ve never been to a real powwow, I’d strongly recommend taking part in such an event. At the link below, there is a calendar for most of the events across the country. If your area is not represented on the link, let’s say it is for New Jersey, just Google “New Jersey Native American PowWow,” and you should find one there or a surrounding state.

Best of all, I’ve never been to one of these events where I haven’t been made to feel very welcome. They are rightfully very proud of their heritage, and will even take the time to explain the different dances and ceremonies.
http://www.powwows.com

Also, if you are planning to attend a powwow, you may wish to read this guide on etiquette for such an event. Remember that many of the activities have spiritual or religious meaning for participants.http://indiancountrytodaymedianetwork.com/2014/03/29/pow-wow-etiquette-10-rules-follow-and-out-arena-154195?page=0%2C0


Wednesday, April 2, 2014

Spring on the Plains


Spring housecleaning.

This is the time of year when a lot of people lose their homes, and some their lives.  Welcome to tornado season.  In recognition of weather turning from ice and snow to 300-mph winds, I cleaned out the tornado shelter this morning.  After vacuuming out the spiders and crickets, I put in a 5-gal bucket with a screw-on air-tight lid for a slop bucket, 3 rolls of toilet tissue, 2 gallons of water, and the battery-powered flourescent camp lantern.  I haven't found it yet, but I've been looking for my air horn.  If wreckage locks us in and all the cell communications are out, it would be nice to attract the attention of would-be rescuers.  We're forecast to have severe weather the next few days with the potential of tornadoes.  On the next trip to the store, I'll grab a box of granola bars to put in there.  Given my dislike of hunger, and the potential for being trapped for up to 3 days, I'd just as soon not be dealing with claustrophobia and starvation at the same time.

Tuesday, April 1, 2014

Raising "Howard"

We have a neighbor that hates squirrels, because he is jealous of the pecans the squirrels might eat off his tree.  We'll call him Howard. A few years ago, we had a real laugh over Howard and his squirrels.  Howard was using a humane trap to catch squirrels from the nearby public park. It was from there that the squirrels were commuting to dine on Howard’s pecan tree. He would load the traps into his pickup and drive them a couple miles outside of town to release them in a wooded area near a farm.



 
Some of the neighborhood men have a coffee klatch at the local drugstore. Kidd Drugs has what must be one of the few remaining real soda fountain counters. One farmer sitting there was lamenting about being overrun by a huge increase in the local squirrel population. To reduce the numbers, he was having to trap the squirrels and bring them to town to release them in the public park. We cracked up over the image of these squirrels spending a day at the farm and a day in the park, while waving to each other as they traveled back and forth between.


The camera flash was scaring them, so I starting taking their
pictures in a mirror, which they didn't seem to mind.  That
is what makes Minnesota read backwards.
 
Jean is a licensed caregiver for injured and orphaned animals. A few weeks ago she got eight orphaned squirrels, four each from two nests. Their parents had been killed on the highway. She uses a syringe to feed them fortified kitten milk replacer until she weans them onto solid food. They can latch onto the syringe and suck so hard that they will pull the plunger into the syringe barrel. Jean has to hold back pressure on the plunger to keep them from choking or drowning themselves. The two litters are apparently just a few days apart in age, based on the comparative rate of developmental changes, so it’s impossible to tell one from another. I deal with this by calling whichever one Jean is feeding at the moment Howard. She doesn’t like naming them, because it makes the separation anxiety that much worse when she has to return them to the wild and say goodbye  Jean says that once they are released, they stay nearby for about three days as they become acclimated.  We’ll go camping with them as they venture forth a bit more each day, returning occasionally for yet one more bit of food from the more familiar source, the two-legged Mommy.


 

Sunday, March 30, 2014

First Paddle of the Season

One of several Canada geese enjoying the day, and a
flock could be heard in an adjacent field.
 
Oh my, what you don’t forget going into the first trip of the season. I started out by forgetting to put several twists in the straps across the canoe. They started such a roar that I had to stop within the first mile to stop the racket. That done, I continued on down to Lake Watonga. The water is undoubtedly near freezing. The lakes have only been free of ice the last week or so, and some hypothermic clothing was needed. I carry my drysuit and Crocs in a separate bag so they are always together. I wear Crocs over my drysuit feet to protect the booties. Well, obviously they are not always together, because I pulled the drysuit out and the bag was empty. I started digging, and they were nowhere to be found. I improvised with boots, but had to go hunting for my Crocs as soon as I got home, and into the bag they went. I guess two things is not so bad after being off the water for a whole winter.

While it was 31-deg F when I got up yesterday morning at 0400, it warmed up nicely during the day. By afternoon it was 70, the heater was off, and the storm door glass was open to allow in some fresh air. What a change.



Unlike so many lakes, Lake Watonga has water.
 
I had a shock when I pulled down to the lake. There were people everywhere. Fishermen were lined up along the banks like birds on a wire. The campgrounds and parking area at the ramp were chocked. As I mentioned, we’ve been having daily winds of 35-50+mph, but today was calm to 10 mph. Everyone has been locked in hibernation, and the one decent day had brought everyone out at once. One day was all we got though, as we are back in 45mph winds again today. Nevertheless, it was a beautiful day.
 
Watonga is a teeny lake. I paddled around the lake four times (4.4 miles), and rescued five fishing bobbers from trees and shrubs. Once I had spoken to nearly everyone on the lake and on the banks, had handed out my treasure of fishing floats, realized I was starving, and was satisfied that everything packed in the truck is indeed now in place, it was time to head for lunch. It was a short day, but nice to be out.



Friday, March 28, 2014

Installing Skid Plates - 2

6. Now that you are ready to install the felts, there are two ways to proceed, but one rule about epoxy. If any epoxy fails to cure, it is almost always the failure to properly mix the two parts. Unlike polyester resin, which mixes easily, epoxy needs to be mixed until the molecules of the two parts are adjacent to each other. Whether hand or power mixing, that means at least three minutes of stirring. Here are the two ways to apply the Kevlar felts.
Resin roller.
 
A - The reason North West had you ready a large piece of cardboard with a plastic cover is for you to saturate the felts on the workbench. To begin with, if you don’t have a resin aerator roller, take scissors and cut off half the length of the paint brush bristles. This will make the bristles stiffer. Lay the felt adjacent to one side of your work surface. Pour a line of resin on the plastic the length of the felt. Lay the felt in the pool and pour another run of resin on top of the felt. Now work the resin over and through the felt to saturate it over its entire surface. If there are any voids, you can probably massage resin into the dry spots from the surrounding surface. Total saturation is essential. If there is any sign of air bubbles, stipple the felt to work the resin through. (Stippling is moving the resin about with short strokes and kneading it through the felt by poking with the end of the bristles. This is why we cut the bristles to half their length.) To avoid a mess, it is better to start with too little resin than too much. You can always brush on a bit more and stipple it through. Once the felt is fully saturated, lay it in place on the canoe and brush and stipple it in place, working from the center out toward the edges and ends. If you have a resin aerator roller, it replaces all of this brushing and stippling. The roller simplifies and improves on the job by making sure there is neither too much nor too little resin in the felt. You can also use an auto-body rubber squeegee to move resin about and into the felt. The greatest advantage of the roller, however, can be seen by examining the edges of the plates where they roll over the curvature of the stem. On Buddy, there is no sign of crumples along the edges of the felts as on the green canoe. This is due to the use of the roller, which works material into place and insures total saturation.

B - This is the method I have used the last 50 years. Brush resin on the area of the hull being covered. Lay the dry felt into the resin and brush a bit more on the top, and roll the resin in with the resin roller. Again, work from the center towards the ends and edges. The aerator blades of the roller insure 100% saturation, thus no bubbles or voids, and also regulate the ration of resin to felt. The roller is also best for working down any puckers in the felt, like around the radius of the stem. If this is the only glassing job you foresee, just brush stipple. If you plan on doing other fiberglass projects, get a resin aerator roller. If you can get one with a metal roller, so much the better. Any epoxy residue may then be burned off with a torch. I have one roller I’ve used for 40 years.

7. Shake some talcum powder on your hands and rub the gloves together. You can now handle other surfaces without spreading sticky resin all over the place. Take paper towel or toilet paper and wipe around the edge of the masking tape to remove any excess or runny residual resin. (Don’t use any paper product after the resin starts to get tacky.) Occasionally touch the resin to see when it is starting to cure. As soon as it reaches a point where it won’t run, remove the paper or plastic skirt we put around the work area to protect the hull. Then remove the masking tape. Never allow the resin to cure with the masking tape still in place. You’ll hate yourself forever. Then, wet a rag with acetone and wipe around the edge of the resin area. This will remove the Magic Marker we used, insure there is no excess resin waiting to run as soon as we turn our backs, and feather the edge so there’s no tape edge in the finished job. Clean all tools with acetone.

8. When the resin in set to a jelly-like state, cut off numerous 12-18” strips of cellophane strapping tape and hang them nearby, like on the edge of the gunwale. Turn under just enough of both ends of the tape to leave a tab you can grab to remove the tape later. Now, holding the tape centered over and perpendicular to the stem, make contact with the center of the tape, and then pull down on both sides while securing the tape to the hull. Continue adding the other strips of tape, overlapping half of the previous strip, and continue until the entire skid plate is covered. You’re done.

9. When the hull epoxy is completely cured, remove the tape. Epoxy will not adhere to the cellophane. The tape further insures total saturation, but more importantly, will cause the epoxy to cure with a gelcoat-smooth finish.


 



 

Thursday, March 27, 2014

Keep Oil & Gas Out of Our Parks

http://www.nytimes.com/interactive/2011/09/09/business/energy-environment/pipeline-spills.html?ref=oilspills&_r=0

If you look at the above map of oil spills across the United States, you may wonder why Texas, Louisiana, and Oklahoma weren't included in the map of the country.  Actually, they were.  You just can't see them for the oil spills.  Look at areas where there are no or few oil spills.  Why, they would be our National Parks.  Politicians from Texas and Utah want our National Parks to look more like Texas, Louisiana, and Oklahoma.  They not only want to halt forever the creation of any further public park lands, but to allow oil and gas interests free reign in the parks we already have.  The owners of drilling and pipeline companies say they will be responsible.  They say that drilling and natural environmental beauty are compatible.  Their own record speaks for itself.  According to one of the reports below, drilling has already started in 12 parks, with an interest in beginning in 30 more.  Am I wrong, or wasn't the idea of the park system to preserve these natural beauties for the enjoyment of all future generations?  Or, were they preserved for the greed of big money interests? 

http://thinkprogress.org/climate/2014/03/26/3419368/congressman-drilling-national-parks/

http://thinkprogress.org/climate/2014/02/09/3268751/alberta-tar-sands-leaking/

Wednesday, March 26, 2014

Installing Skid Plates

Putting a skid plate on your kayak or canoe is not a difficult task, but having done a lot of fiberglass work, perhaps I can offer a couple suggestions for making the job easier and neater.

If anyone has thought of doing a skid plate, or attempting any other project, but shrunk away for fear of making a mess of your canoe or kayak, or botching the job, let me boost your confidence. With a little thought, some research, and a bit of planning, you can do as good a job as any professional, and better than most. The difference in his job and yours is not in quality as much as it is in time. The professional can’t spend all day doing a job to perfection. To stay in business, he has to keep shoving the work out the door. We, on the other hand, can take as much time as we need. We have the luxury of concentrating on the perfection that suits our pride in our boats rather than keeping man-hours to a minimum. The pro does have the advantage of experience and some tricks he’s learned, but with proper preparation, we can accomplish the same result or better.




A professionally installed skid plate.
 
I’m not identifying the canoe builder that I had install my skid plates on one canoe. I do not want to embarrass anyone, but rather stress that you can accomplish professional results in your own shop or garage. Here’s the story.

When I ordered the canoe, the builder asked if I wanted him to install skid plates on the canoe. I usually do such work myself, but was pushing to get ready for a trip, and time was an issue. He had all the materials on hand, where it would take a week for me to order the skid plate kit and receive it, so I told him to deliver the canoe with the skid plates installed. He used a skid plate kit he obtained from North West Canoe. (Link below)http://www.shop.northwestcanoe.com/Repair-Maintenance_c5.htm
 
Buddy, with the completed skid plate.


I also wanted to put epoxy and Kevlar skid plates on my Hornbeck 14, so I later ordered the appropriate kit from the same supplier. You can compare the pictures of the installation jobs and make your own decisions. North West Canoe sends excellent installation instructions with the kit, but with some additions and more explanation that I feel may be beneficial, here are the steps.

1. Select the appropriate skid plate kit. The ‘Repair and Maintenance’ page in the link above explains which kit matches what type of canoe or kayak, whether a composite hull with a fine entry, or a broader-stemmed bow regardless of whether it is on fiberglass, wood, Royalex, or polyethylene. The kit will give you two Kevlar felt plates, two cans of epoxy, parts A & B, and a brush, rubber gloves, and sandpaper. What you will need to also have on hand includes a pencil or felt marker, a 48 X 24” piece of cardboard with plastic over it, clean rags, making tape, denatured alcohol or dewaxer, acetone, talcum powder, and 2“ cellophane strapping tape.
2. Pick a work area away from ignition sources and good ventilation, and a day that will hold 50-degree temperatures to make the epoxy cure. The optimum temperature is 70F, and the warmer it is, the faster the epoxy will cure, and the faster you must work to finish before it begins to cure.. Invert the boat on sawhorses and cover the floor with plastic or newspaper. Clean the hull of dirt, grease, or oil (Dawn or Simple Green), and alcohol, and I would recommend using a dewaxer as well. West Marine, Interlux, and other paint retailers carry cleaner/dewaxers. This removes the mould-release wax the builder uses to pop the hull out of the mould, and is critical for complete adhesion.
 
Marking and taping the installation location.
 

 
3. Position the dry felt on the stem, and when it’s where you want it, tack it in place with a couple pieces of masking tape. Draw a line around the felt. Allow room around the edges, as the felt will spread as it is worked, mostly in length. (About 3/8” on either side and 1 ½” to either end.) You can use a pencil, but I use Magic Marker, because when I clean up the edges of the epoxy later, the acetone will remove all the marks and not leave pencil lines.

4. Remove the felts and apply masking tape around the perimeter of the outlines you have drawn. Over this tape, tape a skirt surrounding the application area and covering the hull. This is to catch any drips or spatters of epoxy, and may be of newspaper, plastic, brown shopping bags, etc.  Take a piece of about 80-grit sandpaper, and sand the area about to be covered.  This is just to remove the gloss and provide a slightly roughened surface for mechanical attachment by the expoxy.  Don't assume that sanding will make dewaxing unnecessary.  Sanding in that case will just smear the wax around and make removal more difficult.
 
Surrounding the work area with a paper skirt.
 
5. When you are absolutely certain everything is ready to go, you can mix the epoxy and start the clock. North West’s directions tell you to dump all of parts A & B together at once. I’d recommend against this for three reasons. The resin and catalyst are mixed at a ration of 3:1. Since we know the ratio, instead of mixing by the can-full, we can mix any smaller quantity at the same ratio.

No. 1 - Mixing in smaller quantities, like in a clean tuna fish can, especially if you haven’t done a lot of fiberglassing, gives you much more time. You can work one skid plate at a time. Mixing everything together means you have to complete the entire job before it starts of fire off. Also, if you accidentally drop the can of mixed epoxy, you’re screwed. If you have only a small amount mixed, just mix another batch.

No. 2 - Curing is a chemical reaction. When you mix large quantities, you generate more heat, which makes the cure happen much more quickly. This again cuts down your working time, called pot life, or how soon the whole pot fires off and ends the job whether your work is completed or not. Also, if you do mix larger quantities, be sure not to set the mix down and walk off and leave it. It can get hot enough to ignite and cause a fire. Regardless of the size, when I’m done, I always set the can outside until it has cured.

No. 3 - Kevlar felt will often leave a rough finish. Using small mixes will usually leave a small amount that you can mix at the end and brush on as a dress coat.

Continued in the next post.




 

Monday, March 24, 2014

A Weather Whine

 
It’s called the Serenity Prayer. Originally created by Reinhold Niebuhr, it has been adopted for various purposes, like the AA Twelve Step Program. It goes, “God, grant me the serenity to accept the things I cannot change, the courage to change the things I can, and wisdom to know the difference.”  Weather certainly counts among the things that can’t be changed, making whining pointless, but frustration, at least for me, trumps serenity.

I’m working on the last of the posts on voyage planning. In the meanwhile, I’m saddled with the usual chores that we all face in trying to get the home front stabilized enough that I can walk away long enough to go paddling. My task now is cleaning, weeding, digging, separating, planting, fertilizing, and mulching 400 and some feet of flowerbeds, which I detest, abhor, and otherwise look upon with disfavor. I’m totally lacking in the gardening gene that some possess in abundance, some even to the point that they find pleasure in this chore. Therefore, the first part of tackling this job is always overcoming the burden of inertia.

If this wasn’t enough, we’ve had four days of gale force winds, in the 45-50mph range, just in the last week. The balance of the time it’s just windy enough to knock birds over onto their faces if they miscalculate and turn their tails to the wind. The wind makes this job somewhat like the proverbial one-armed paperhanger. I weed, trim back dead growth, and clean the flowerbed only to have a gust of wind blow it all back into the freshly cleaned area. Worst yet, it blows back into areas I have already dressed and mulched, so it looks like I haven’t done anything.

The waste is supposed to go into the bag-lined garbage can. If I’m fortunate enough to graduate to the point where I get enough raked up to put the yard debris into the can, as soon as I pick up a rake-full of debris, the can blows over. This is solved by dropping what I’ve just gathered together so I can grab and set the can back up and reattach the bag as I watch the gathered yard waste scattered back across the yard. I’ve tried propping the can up so it can’t blow over, but then the wind sucks the bag out of the can, whipping it about in the air. Occasionally the wind will even rip the bag off the can, even though it has been pulled well down over the outside of the can. That sends the bag off cross-country with me in hot pursuit.

Part of the displeasure comes from dealing with county leaves. I raked, bagged, and disposed of my own leaves months ago. Then I raked, bagged, and disposed of my neighbors’ leaves. At least once more during the winter and again in the spring, I have to rake, bag, and dispose of the county leaves and litter, which I’m convinced travel dozens of miles to get here.

If the logical first assumption is to just wait until there is a day when it isn’t so windy, then you need to come to NW Oklahoma. If you rule out the days of snow and wind, freezing rain and wind, sleet and wind, hail and wind, flash wild fires driven by wind, severe thunderstorms and wind, and tornadoes, that only leaves on average about four days a year. If a nice day comes, assuming it comes before the paddling season is over, I’d rather spend it out paddling somewhere rather than fooling around with bloody flowerbeds and aerial trash. Serenity? Not here!





Friday, March 21, 2014

Sailing & Paddling with Doug

Core Sound 20 Mk.III nearing completion.
Credit: Doug Cameron
 
I saw a Facebook post today that led me to Doug Cameron’s blog, “Sailing and Paddling with Doug.” I’ve added a link to it in the Favorite Blog list to the right. This is the prototype, or Hull #1, of the new Core Sound 20 Mk. III by Graham Byrnes of B&B Boat Design.   Doug, from Sewanee, TN, is nearing completion of the boat that is meant for either sailing or rowing. If you have an interest in pocket cruisers, you may find this really interesting. Be sure to read his post from February 7, as it gives the whole conceptual background on the boat.



Thursday, March 20, 2014

Happy Vernal Equinox

 
Happy Vernal Equinox, alias Happy Spring, alias Happy Paddling Season.  Nothing says spring like a beautiful spring floral arrangement.  Jean picked up the raw materials and created this yesterday for the front door.  Beautiful job, no?

Wednesday, March 19, 2014

Charts - 2

The chart's compass rose.
Illus. credit: Google Images
 
The chart is loaded with informational symbols. There will be some things that jump out at you, like the colors. Yellow is dry land, green is marsh or tidal, white is deep water, and different shades of blue indicate shallow water. There is also magenta, as is used on the compass rose above. Magenta is a purple, and is used for any red aids to navigation since a navigator’s red night light would bleach red out. I know you’re not likely to have a red chart light on your canoe or kayak, but it is an interesting FYI. You have to inspect the chart to determine what ’shallow’ is, as it will vary from chart to chart. Shallow may be shown at 3ft, 6 ft or one fathom, 2 or 3 fathoms, etc. This is determined by inspecting the contour lines, and apply only to that chart. The most important things shown on land are those objects from which bearings may be taken. These include things like lighthouses, towers, smokestacks, church steeples, water tanks, silos, and so on. They are the best things to take bearings on, as they won’t move like buoys may.

To understand everything on a chart, you want to get a copy of Chart No. 1, which is not a chart at all, but a catalog of all the symbols used on any US charts. They used to be free, but free has gone the way of the dodo bird. NOAA no longer prints Chart 1, but at the following link, you may download a PDF of Chart No. 1 or purchase a commercially printed copy from one of NOAA’s licensed chart printers. They are listed there also.http://www.nauticalcharts.noaa.gov/mcd/chartno1.htm


http://www.nauticalcharts.noaa.gov/mcd/chartno1.htm
At this second link, you can obtain a catalog of all the charts available for the area you may be interested in, or view the chart on-line to make sure it’s the one you want. You may then contact one of the authorized printers to obtain a copy of a POD chart. A POD, or ‘print on demand’ chart is not printed until it is ordered. The advantage is that the chart is printed with all the corrections and updates available at the time of the printing, and is usually available for shipping within a couple days. If you look in the left margin of the site, you’ll see a tab for finding paper charts.

A number of sources will print small craft charts, which are of particular use for paddlers, especially the ones that are spiral bound. Among those, you will also find charts that are laminated, waterproof, or water resistant. I have included a link to one such supplier, not as a recommendation for that business, but so you can see what is available.http://www.waterproofcharts.com/maine-boston-charts-maps-nav.htm
http://www.landfallnavigation.com/bookscruiseinland.html

If you are using paper charts, there are a couple things you can do to protect them from water damage. One is taking them to an office supplier and having them film laminated. The second is carrying them in a map/chart case. Third, you can apply a sealer yourself, such as the Map Seal Waterproofing sold by Campmor. It is a water-based polymer film you just brush on. Cliff Jacobson has another suggestion, which I haven’t tried. He brushes his charts and maps with Thompson Water Seal as a less expensive alternative to the other options.

A number of other chart suppliers you can search are Richardson Maptech, Imray-Iolaire, Canadian Hydrographic, and British Admiralty. There are also major navigation supply houses that can fit you out with any chart you may want from anywhere in the world. All you have to do is ask. Three are Maryland Nautical, Bluewater Books and Charts, and Landfall Navigation.http://mdnautical.com/655-captain-segull-s-nautical-sportfishing-charts
http://www.bluewaterweb.com/Default.aspx
http://www.landfallnavigation.com/charts.html

If you find this topic of interest, Amazon lists 2,793 books on both land and coastal navigation. If you want to really go academic on the topic of navigation, the ultimate resources are:

No.9, The American Practical Navigator by Nathaniel Bowditch, commonly just referred to as Bowditch.

Dutton’s Nautical Navigation, 15th Edition, by Thomas J. Cutler

Marine Navigation: Piloting and Celestial and Electronic Navigation by Richard R. Hobbs.

Bowditch is the navigational bible, and was likely the main source for the writing of the other 2,792 navigation books. The latter two were written as navigation textbooks for the U.S. Naval Academy. Some reviewers prefer Dutton over Hobbs for greater clarity.
 



Monday, March 17, 2014

Charts - 1

Nautical Chart. Credit: Google Images
 
What is a chart? To begin with, a chart is not a map, although I have indeed seen it defined as a map used for navigational purposes. You’ll remember that a map can be a graphic or symbolic representation of a portion of the earth’s surface. There is nothing symbolic about a chart. It is a precise navigational tool. Specifically, a chart is a graphic representation of a portion of the earth’s spherical surface onto a plane surface according to a specific method of projection with emphasis on things of interest to the navigator. In one sentence, that’s four things typical of a chart that are not found on a map. Also, a full chart is a working surface, and not just meant to be viewed. Most navigational problems, and all plots for heading, track, bearings, set and drift, and everything else, are worked out right on the chart’s surface. For a paddler, a nautical chart really comes into its own when planning a coastal sea kayaking trip, a navigable river trip, or one through the Great Lakes..

To condense this subject into a small capsule, there are two subjects that can be touched on briefly. The first is of little importance to the paddler beyond academic curiosity, but the second subject is of importance to paddlers who use charts.

First, how do we crush a sphere onto a plane, flat surface without distorting it? As we said, distortion is not a big deal on a map, and indeed some distortions are intentionally introduced. On a chart, the distortion must be removed, or concentrated in an area of least importance or, used on charts of large enough scale that distortion is negligible over the area of that chart. There are different projection methods used to accomplish this, each with an advantage to a specific application. Just to name them, they are Mercator, Gnomonic, Polyconic, and Lambert Conformal. The one 99% of us use 99% of the time will be the Mercator chart. Its advantages are that course and bearing lines can be drawn as straight lines, and for plotting ease, parallels and meridians are straight lines and intersect at right angles.

Second, the big difference is that the chart stresses those things of importance to the navigator. It incorporates not just a “this way is North” arrow, but a compass rose that gives degrees referenced to the north pole, True North, and may incorporate a concentric inner rose with degrees referenced to Magnetic North, and the magnetic north pole, thus allowing for magnetic variation, or the geographic error between true and magnetic north. In the center of the rose will be the local geographic variation and its rate of change. Since all meridians and parallels are oriented to True North, to use a plotter and get a heading for your magnetic compass, variation needs to be applied, either added or subtracted.

There are both nautical charts and aeronautical charts. We’re obviously only concerned with nautical charts. The first thing to do when you pick up a chart is to inspect its legend. It can be spotted by the NOAA crest and label in bold caps. For example: United States - East Coast - Virginia - Chesapeake Bay Entrance. There you will find all the reference information for that chart, such as Mercator projection, Scale, Soundings in Feet from a Datum of Mean Lower Low Water. In the corners of the chart will be the chart number, and the date of its last update and edition number.

Continued in the next post.